250 Ton Turn-Out Metal Baler for Ferrous Scrap Compaction and Recycling

1. Product Introduction

The 250 ton turn-out metal baler is designed for ferrous scrap compaction and recycling operations that require reliable bale formation, stable hydraulic compression, and simple bale discharge handling.

This model adopts a turn-out bale discharge structure, allowing compressed bales to be discharged directly by rotating the chamber body after the compression cycle is completed. Compared with manual bale removal methods, the turn-out system simplifies bale handling and improves operating efficiency in daily recycling operations.

The machine is suitable for scrap yards, recycling centers, steel recovery facilities, and metal processing workshops that handle medium-density ferrous scrap materials and require compact bale output for transportation and storage.

The large compression chamber allows operators to process loose steel scrap, metal offcuts, light structural materials, and recyclable ferrous metals into dense bales suitable for downstream recycling and furnace charging.

2. Product Positioning

Turn-Out Metal Baler for Ferrous Scrap Compaction

Suitable for:

1. Steel scrap recycling
2. Ferrous scrap volume reduction
3. Recycling yard operations
4. Scrap transportation preparation
5. Metal collection centers
6. Steel recovery facilities

This machine is designed for customers looking for a practical turn-out bale discharge solution rather than a side eject or front-out baling system.

3. Suitable Materials

The machine is suitable for processing:

1. Steel scrap
2. Scrap steel sections
3. Angle steel offcuts
4. Light structural scrap
5. Sheet metal scrap
6. Metal fabrication waste
7. Recyclable ferrous materials
8. Workshop production offcuts
9. Steel profiles
10. Mixed ferrous scrap

4. Recommended Application Scenarios

4.1 Scrap Yard Operations

Suitable for daily steel scrap compaction before transportation and storage.

4.2 Ferrous Recycling Stations

Helps reduce storage volume and improve loading efficiency.

4.3 Metal Collection Centers

Suitable for preparing recyclable metal materials for shipment.

4.4 Steel Processing Workshops

Processes steel offcuts and manufacturing waste into compact bales.

4.5 Furnace Feed Preparation

Produces dense scrap packages suitable for downstream steel recycling operations.

5. Technical Specifications

6. Core Product Advantages

6.1 Turn-Out Bale Discharge System

The turn-out structure allows compressed bales to be discharged through chamber rotation, simplifying bale removal procedures.

6.2 Large Compression Chamber

The 2000 × 1400 × 900 mm chamber accommodates a wide range of steel scrap materials and improves feeding efficiency.

6.3 Dense Bale Output

Bale density exceeds 1800 kg/m³, helping reduce transportation costs and improve storage utilization.

6.4 Suitable for Medium Recycling Operations

The machine is designed for medium-volume scrap processing applications commonly found in recycling yards and collection centers.

6.5 Stable Hydraulic Compression

The hydraulic system provides consistent compression force throughout repeated operating cycles.

7. Working Principle

7.1 Scrap Feeding

Loose scrap materials are loaded into the compression chamber.

7.2 Hydraulic Compression

The hydraulic cylinders compress the material into a compact bale section.

7.3 Bale Formation

The bale is formed according to preset dimensions and density requirements.

7.4 Turn-Out Discharge

After compression, the chamber rotates and releases the finished bale through the turn-out mechanism.

7.5 Bale Collection

Finished bales are collected for storage, transportation, or recycling.

8. RFQ

8.1 What information should buyers provide before quotation?

1. What type of scrap material do you process?
2. What is the maximum scrap size?
3. What is your expected hourly output?
4. Do you require manual or PLC operation?
5. What is your available electrical supply?
6. What installation space is available?

8.2 Why is this information important?

1. It helps determine the correct baler configuration.
2. It confirms whether the turn-out structure suits your operation.
3. It improves quotation accuracy.
4. It helps optimize equipment selection.

9. FAQ

9.1 What is the main advantage of a turn-out metal baler?

The turn-out system simplifies bale discharge by rotating the chamber and releasing the bale directly.

9.2 What materials can this machine process?

The machine is suitable for steel scrap, sheet metal scrap, steel sections, and recyclable ferrous materials.

9.3 What is the bale density?

The bale density exceeds 1800 kg/m³.

9.4 Is PLC control available?

Yes. PLC semi-automatic operation is available.

9.5 What is the production capacity?

The machine can process approximately 3500–4500 kg of scrap material per hour depending on scrap type and feeding conditions.

9.6 Can the machine be customized?

Yes. Voltage, operation system, and optional configurations can be customized according to project requirements.

10. After-Sales Service

Jiangsu Wanshida Hydraulic Machinery Co., Ltd. provides equipment selection support, technical consultation, factory testing, installation guidance, spare parts supply, and long-term technical assistance.

Customers are encouraged to provide scrap photos, material dimensions, and expected production requirements before quotation.

11. Request a Suitable Turn-Out Baler Solution

If you are looking for a turn-out metal baler for ferrous scrap compaction, please provide:

1. Scrap material photos
2. Maximum material dimensions
3. Expected hourly output
4. Installation location
5. Power supply requirements

Our engineering team will recommend a suitable baling solution according to your recycling operation conditions.